CBTPJ - B-149 PLASTIC COATING COMPOUND

  • MSDS: CBTPJ
  • Manufacturer: EVANS MFG INC
  • Product Name: B-149 PLASTIC COATING COMPOUND
  • National Stock Number: 8030-00-582-4598
Product Identification

Product ID:B-149 PLASTIC COATING COMPOUND
MSDS Date:01/23/1995
FSC:8030
NIIN:00-582-4598
MSDS Number: CBTPJ

Responsible Party
EVANS MFG INC
1330 SOUTER
TROY, MI 48083
US

Emergency Phone: 313-583-9890

Info Phone: 313-583-9890

Preparer: THOMAS B EVANS

Cage: 56307

Contractor
EVANS MFG INC
TROY, MI 48083 US

Cage: 56307

Ingredients

THIS PRODUCT CONTAINS NO KNOWN HAZARDOUS COMPONENTS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:NON-HAZARDOUS. NO RESPIRATORY IRRITATION
EXPECTED. MELTED COMPOUND CAN BURN AT ROOM TEMPERATURE.

First Aid

First Aid:APPLIED AT 350F IF COMES IN CONTACT WITH SKIN - TREAT AS OIL
BURN

Fire Fighting

Flash Point:3950F,2177C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM, CO2.
Fire Fighting Procedures:TREAT AS OIL FIRE
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE THE FLASH POINT THIS
MATERIAL WILL RELEASE FLAMMABLE VAPORS WHICH CAN BURN OR BE
EXPLOSIVE.

Accidental Release

Spill Release Procedures:SOLID
Neutralizing Agent:NA

Handling

Handling and Storage Precautions:STORE IN COOL DRY AREA.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:IF DESIREDD.
Ventilation:IF ODOR OBJECTIONABLE, KITCHEN TYPE EXHAUST FAN.
Protective Gloves:COTTON TYPE WHILE DIPPING
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>700F,>371C
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NA
Vapor Density:NA
Spec Gravity:1
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:100% SOLID THERMO PLASTIC WAX LIKE OIL ODOR
Percent Volatiles by Volume:NA
Corrosion Rate:NA

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALIES
Stability Condition to Avoid:DIPPING IN EXCESS OF 360F.

Disposal

Waste Disposal Methods:SAME AS WAX OR OIL. INCINERATION OR LAND FILL TO
COMPLY W/FEDERAL, STATE, LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.